- Details
- Status: In production
- Output Type: analogue
- Temperature Min: -40°C
- Temperature Max: +120°C
- Case: SIL
- No. of pins: 2
- Voltage supply: Min: 2.7
- Voltage supply: Max: 5.5
- Capacitance Min: 310pF
- Capacitance Max: 350pF
The Smartec SMT HS07 capacitive humidity sensor is based on silicon technology on glass wafer. By using this process it is possible to make sensors on a high volume scale on a low cost way. This humidity sensor consists of three layers. The base and top layer are conductive and the layer in between is humidity sensitive polymide. The selection of this sensitive interface makes the sensor highly independent to temperature effects. The top layer has grid like structure. The sensor converts humidity into a capacitance. Due to the construction the response to humidity is very fast. The sensor is also available with protective casing SMT HS07C
* Measures from 0 to 100% RH
* Linear within a band of 2% in between 20 and 95% RH
* Very fast < 15 sec with low hysteresis <2% RH
* Small size: 6 x 7 mm
* Application; Medical, humidifiers, HVAC, Weather stations
- Details
- Status: In production
- Output Type: analogue
- Temperature Min: -40°C
- Temperature Max: +120°C
- Case: SIL
- No. of pins: 2
- Voltage supply: Min: 2.7
- Voltage supply: Max: 5.5
- Capacitance Min: 310pF
- Capacitance Max: 350pF
The Smartec SMT HS07C capacitive humidity sensor is based on silicon technology on glass wafer. By using this process it is possible to make sensors on a high volume scale on a low cost way. This humidity sensor consists of three layers. The base and top layer are conductive and the layer in between is humidity sensitive polymide. The selection of this sensitive interface makes the sensor highly independent to temperature effects. The top layer has grid like structure. The sensor converts humidity into a capacitance. Due to the construction the response to humidity is very fast.
* SMT HS07C has a protective case over the sensor
* Measures from 0 to 100% RH
* Linear within a band of 2% in between 20 and 95% RH
* Very fast < 15 sec with low hysteresis <2% RH
* Small size: 7 x 10 mm
* Application; Medical, humidifiers, HVAC, Weather stations
- Details
- Status: Obsolete
- Output Type: analogue
- Temperature Min: -40°C
- Temperature Max: +120°C
- Case: SIL
- No. of pins: 2
- Voltage supply: Min: 2.7
- Voltage supply: Max: 5.5
- Capacitance Min: 200pf
- Capacitance Max: 280pF
The Smartec SMT HS10 humidity sensor is a two terminal capacitor, which increases in value as water molecules are absorbed into its active polymer dielectric. This part is obsolete and only a small quantity, for product repairs are still available from MMS Electronics Ltd while our stock last.
* Do not use for new designs, only for repairs of products that use the HS10 sensor
* Size: 2.8 x 3.6 mm
* This is a Non RoHs part !!
