- Details
- Status: Available while in stock, not for new designs
- Output Type: Analog
- Temperature Min: -0°C
- Temperature Max: +300°C
- Case: TO-05
- No. of pins: 4
- Voltage supply: Min: not defined
- Voltage supply: Max: not defined
- Response time: 40mS
The Smartec infrared sensor SMT IR9901 is a sophisticated full silicon infrared sensor. This sensor can be used for measuring non contact radiation temperature. The sensor is fitted with a 5.5 µm high pass filter good for most common applications. For different radiation temperature ranges other filters are available. These sensors output a small analogue voltage. An amplifier and interface is required before the voltage can be digitised and referenced to the temperature.
* Overall accuracy and sensitivity
* High pass IR filter (>5.5µm)
* Fast 40mS response
* Analogue output
* Applications: Climate control,Medical, Temp control of moving objects
- Details
- Status: Obsolete part, not available anymore
- Output Type: Analog
- Temperature Min: -0°C
- Temperature Max: +300°C
- Case: TO-05
- No. of pins: 4
- Voltage supply: Min: not defined
- Voltage supply: Max: not defined
- Response time: 40mS
This parts is now obsolete (May 2021), an alternative part is the new SMT IR2102.
The Smartec infrared sensor SMT IR9902 is a sophisticated full silicon infrared sensor with built in temperature sensor (Ni). This sensor can be used for measuring non contact radiation temperature. The sensor is fitted with a 5.5 µm high pass filter. For different radiation temperature ranges other filters are available. These sensors output a small analogue voltage. An amplifier and interface is required before the voltage can be digitised and referenced to the temperature.
* Overall accuracy and sensitivity
* High pass IR filter (>5.5µm)
* Fast 40mS response
* Analogue output
* Applications: Climate control, Medical, Temp control of moving objects
- Details
- Status: Available while in stock, not for new designs
- Output Type: Analog
- Temperature Min: -0°C
- Temperature Max: +300°C
- Case: TO-05
- No. of pins: 4
- Voltage supply: Min: not defined
- Voltage supply: Max: not defined
- Response time: 50mS
The Smartec infrared sensor SMT IR9902Sil is a sophisticated full silicon infrared sensor with built in temperature sensor (Ni) and silicone lens for a small 7.27° viewing angle . This sensor can be used for measuring non contact radiation temperature. The sensor is fitted with a 5.5 µm high pass filter. For different radiation temperature ranges other filters are available. An amplifier and interface is required before the voltage can be digitised and referenced to the temperature .
* Overall accuracy and sensitivity
* High pass IR filter (>5.5µm))
* Fiel of view: 7.27°
* Fast 50mS response
* Analogue output
* Applications: Climate control,Medical, Temp control of moving objects
- Details
- Status: In production
- Output Type: USB
- Temperature Min: -45°C
- Temperature Max: +130°C
- Case: PCB
- No. of pins: not defined
- Voltage supply: Min: not defined
- Voltage supply: Max: not defined
The Smartec SMTIRIN06 interface board is designed use with the Smartec SMTIR9902 infrared sensor but can also be used with other infrared sensors. The Smartec SMTIR9902 infrared sensor makes non contact temperature measurements of distant objects. The net captured infrared radiation heats up the black top of the internal thermopile (stacked thermocouples) with respect to the sensor housing. This creates a temperature difference between the respective junctions of the thermopile, which results in a DC voltage over the connecting wires (in the micro- to millivolt range). If a Smartec digital temperature sensor SMT160-30 is in contact with the remote body and the sensor is connected to its corresponding input on the SMTIRIN06 board, this sensor can be used to measure the temperature of that body in a non contact less way. The results can not only be used to verify the IR temperature measurements, but also to calibrate the system when measuring objects of which the emission factor is not known. The output of the AD converters (Infrared sensor output and the built-in Ni temperature sensor) and the digital sensor temperature are transmitted to the RS2323 and USB port for analysing on a PC or laptop.
