- Details
- Total Width: 116
- Total Height: 37
- View area width: 82.2
- View area height: 18.6
- Thickness: 26
- Status: In production
- Backlight Colour: white
- Char X Line: 20
- Char Height: 5.55
- Background Colour: blue
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 0.65
- Pixel Size X: 0.6
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER202-NLW Serial UART text display (Blue-White) 2x20 (5.55mm character height) with RS-232 interface and LED backlight. Incl. on/off comand. Various baud rates, addressable. Display comes with frontal bezel.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 77
- Total Height: 47
- View area width: 60
- View area height: 22
- Thickness: 29
- Status: In production
- Backlight Colour: yellow/green
- Char X Line: 20
- Char Height: 4.03
- Background Colour: grey
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 0.48
- Pixel Size X: 0.42
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER204-4NLED Serial text display 4x20 (4.03mm character height) with RS-232 interface and yellow/green LED backlight. Incl. on/off comand. Various baud rates, addressable. Display is supplied with a bezel.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 77
- Total Height: 54
- View area width: 56.5
- View area height: 22
- Thickness: 25
- Status: In production
- Backlight Colour: yellow/green
- Char X Line: 20
- Char Height: 3.72
- Background Colour: grey
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN Y/G
- Pixel Size Y: 0.44
- Pixel Size X: 0.44
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER204-92HNLED Serial text display 4x20 with RS-232 interface and snap-in bezel. Yellow/green LED backlight incl. On/off comand. Various baud rates, addressable. Extended operating temperature range: -20..+70°C.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 146
- Total Height: 62.5
- View area width: 123
- View area height: 42.5
- Thickness: 29
- Status: In production
- Backlight Colour: yellow/green
- Char X Line: 20
- Char Height: 9.22
- Background Colour: grey
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 0.55
- Pixel Size X: 0.5
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER204-BNLED Serial text display 4x20 (9.2mm character height) with RS-232 interface and yellow/green LED backlight. Incl. on/off comand. Various baud rates, addressable. Display comes with frontal bezel.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
