- Details
- Total Width: 98
- Total Height: 60
- View area width: 76
- View area height: 25.2
- Thickness: 29
- Status: In production
- Backlight Colour: white
- Char X Line: 20
- Char Height: 4.75
- Background Colour: grey
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 0.55
- Pixel Size X: 0.55
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER204-NLED Serial text UART display 4x20 (4.75mm character height) with RS-232 interface and yellow/green LED backlight. Incl. on/off comand. Various baud rates, addressable. Display supplied with front bezel.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 98
- Total Height: 60
- View area width: 76
- View area height: 25.2
- Thickness: 29
- Status: In production
- Backlight Colour: white
- Char X Line: 20
- Char Height: 4.75
- Background Colour: blue
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 0.55
- Pixel Size X: 0.55
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER204-NLW Serial UART text display 4x20 (4.75mm character height) with Blue background and White characters and RS-232 interface and LED backlight. Incl. on/off comand. Various baud rates, addressable. Display supplied with frontal bezel.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 208
- Total Height: 40
- View area width: 178
- View area height: 23
- Thickness: 29
- Status: In production
- Backlight Colour: yellow/green
- Char X Line: 24
- Char Height: 9.63
- Background Colour: grey
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 1.16
- Pixel Size X: 1.16
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER242-BNLED Serial UART text display 2x24 (9.66mm character height) with RS-232 interface and yellow/green LED backlight. Incl. on/off comand. Various baud rates, addressable.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 144
- Total Height: 104
- View area width: 114
- View area height: 64
- Thickness: 29
- Status: In production
- Backlight Colour: yellow/green
- Char X Line: 16
- Char Height: 3.55
- Background Colour: grey
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 0.4
- Pixel Size X: 0.4
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER4016-NLED Serial UART text display 16x40 (3.6mm character height) with RS-232 interface and yellow/green LED backlight. Incl. on/off comand. Various baud rates, addressable.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
