- Details
- Total Width: 77
- Total Height: 54
- View area width: 56.5
- View area height: 22
- Thickness: 26
- Status: In production
- Backlight Colour: yellow/green
- Char X Line: 16
- Char Height: 6.68
- Background Colour: grey
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 0.8
- Pixel Size X: 0.56
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER162-92NLED Serial UART text display 2x16 with RS-232 interface and snap-in bezel. Yellow/green LED backlight incl. On/off comand. Various baud rates, addressable.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 122
- Total Height: 44
- View area width: 99
- View area height: 24
- Thickness: 29
- Status: In production
- Backlight Colour: yellow/green
- Char X Line: 16
- Char Height: 9.66
- Background Colour: yellow/green
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN Y/G
- Pixel Size Y: 1.1
- Pixel Size X: 0.92
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER162-BNLED Serial UART text display 2x16 (9.66mm character height) with RS-232 interface and yellow/green LED backlight. Incl. on/off comand. Various baud rates, addressable. Display supplied with frontal bezel.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 122
- Total Height: 44
- View area width: 99
- View area height: 24
- Thickness: 29
- Status: In production
- Backlight Colour: white
- Char X Line: 16
- Char Height: 9.66
- Background Colour: blue
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 1.1
- Pixel Size X: 0.92
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER162-BNLW Serial text display (blue-white) 2x16 (9.66mm character height) with RS-232 interface and White LED backlight. Incl. on/off comand. Various baud rates, addressable. Display comes with frontal bezel.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
- Details
- Total Width: 80
- Total Height: 36
- View area width: 64.5
- View area height: 13.8
- Thickness: 27
- Status: In production
- Backlight Colour: yellow/green
- Char X Line: 16
- Char Height: 4.35
- Background Colour: grey
- Current Backlight Off (mA): 0
- Current Backlight On (mA): 0
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 0.5
- Pixel Size X: 0.55
- Controller: EA
- Active: 1
- Fonts: 1
- Touch Type: 0
EA SER162-CNLED Serial UART text display 2x16 (4.35mm character height) with RS-232 interface and yellow/green LED backlight. Incl. on/off comand. Various baud rates, addressable. Display supplied with frontal bezel.
- Supply voltage +5V DC (For optional 9 to 35V supply add option OPT EA OPT-9/35V)
- LED backlight controlled On/Off with software command
- High contrast supertwist LCD
- Selectable baud rate setting with program link 300, 1200, 2400 and 9600 baud
- Serial data voltage level can be setup for 5V CMOS or +/-12V RS232 level.
- Onboard contrast adjustment with temparature compensation
- For optional RS-422 interface add part EA OPT-RS422
- For RS232 cable 1.5m with 9D plug add part EA KV24-9B
All incoming serial data is interpreted as ASCII data and displayed. As the display fills up, the characters automatically scroll to the top.
CR/LF are recognized and executed. FF (12d/$0C) clears the display.
Commands are available to set the cursor, cursor position, backlight On/Off and set upto 6 free to use outputs. For full list of all commands see datasheet.
All commands start with Esc (27d = 0x1B) followed by the command.
