- Details
- Total Width: 55
- Total Height: 31
- View area width: 51
- View area height: 14.5
- Thickness: 2
- Status: In production
- Interface: SPI, 4/8 Bit
- Backlight Colour: not defined
- Char X Line: 8
- Char Height: 11.97
- Background Colour: blue
- Current Backlight Off (mA): 0.25
- View Angle: 6:00 / bottom view
- Display Technology: STN blue
- Pixel Size Y: 1.47
- Pixel Size X: 0.97
- Controller: ST7036
- Active: 1
- Fonts: 1
DOG series character display with 1x8 (line x 8 chars), large 11.97 mm char height. Extremely thin 2.0mm (display only) or 5.7mm when used with a LED backlight, COG display in STN neg transmissive blue. 3.3 V or 5 V single supply. The display be can soldered directly into the PCB or plugged into a connector with 2.54 mm pitch EA FL-20. The display has a ST7036 controller with SPI and 4-/8- bit parallel interface. Character set is included and an extra 8 free definable characters can be programmed.
With this display the LED backlight needs to be on to read the information.
Possible backlights for use with the EA DOGM081B-A display are EA LED55x31-W (White), EA LED55x31-A (Amber), EA LED55x31-G (Green), EA LEDx31-R (Red) and EA LED55x31-RGB (Full colour). The picture shows the EA DOGM081B-A display with the EA LED55x31-W White backlight.
The LED backlight need to be ordered separately. Click HERE for the EA LED55x31 backlights.
Download the free of charge DOG-Simulator and experiment with all combinations of display technology and LED backlight colours. Show the DOG displays on your desktop without any programming or order the EA 9780-4USB test board to power your display.
Click HERE for more details on the DOG-simulator.
- Details
- Total Width: 55
- Total Height: 31
- View area width: 51
- View area height: 14.5
- Thickness: 2
- Status: In production
- Interface: SPI, 4/8 Bit
- Backlight Colour: not defined
- Char X Line: 8
- Char Height: 11.97
- Background Colour: yellow/green
- Current Backlight Off (mA): 0.25
- View Angle: 6:00 / bottom view
- Display Technology: STN Y/G
- Pixel Size Y: 1.47
- Pixel Size X: 0.97
- Controller: ST7036
- Active: 1
- Fonts: 1
DOG series character display with 1x8 (line x 8 chars), large 11.97 mm char height. Extremely thin 2.0mm (display only) or 5.7mm when used with a LED backlight, COG display in STN positive transmissive. 3.3 V or 5 V single supply. The display be can soldered directly into the PCB or plugged into a connector with 2.54 mm pitch EA FL-20 . The display has a ST7036 controller with SPI and 4-/8- bit parallel interface. Character set is included and an extra 8 free definable characters can be programmed.
This display is readable without a backlight, making it ideal for low power applications.
Possible backlights for use with the EA DOGM081E-A display are EA LED55x31-W (White), EA LED55x31-A (Amber), EA LED55x31-G (Green), EA LEDx31-R (Red) and EA LED55x31-RGB (Full colour). The picture shows the EA DOGM081E-A display with the EA LED55x31-G Green backlight.
The LED backlight need to be ordered separately. Click HERE for the EA LED55x31 backlights.
Download the free of charge DOG-Simulator and experiment with all combinations of display technology and LED backlight colours. Show the DOG displays on your desktop without any programming or order the EA 9780-4USB test board to power your display.
Click HERE for more details on the DOG-simulator.
- Details
- Total Width: 55
- Total Height: 31
- View area width: 51
- View area height: 14.5
- Thickness: 2
- Status: In production
- Interface: SPI, 4/8 Bit
- Backlight Colour: not defined
- Char X Line: 8
- Char Height: 11.97
- Background Colour: yellow/green
- Current Backlight Off (mA): 0.25
- View Angle: 6:00 / bottom view
- Display Technology: STN Y/G
- Pixel Size Y: 1.47
- Pixel Size X: 0.97
- Controller: ST7036
- Active: 1
- Fonts: 1
DOG series character display with 1x8 (line x 8 chars), large 11.97 mm char height. Extremely thin 2.0mm display, COG display in STN pos yellow/green. 3.3 V or 5 V single supply. The display be can soldered directly into the PCB or plugged into a connector with 2.54 mm pitch EA FL-20. The display has a ST7036 controller with SPI and 4-/8- bit parallel interface. Character set is included and an extra 8 free definable characters can be programmed.
The EA DOGM081L-A display can not be used with a LED backlight, Ideal for low power applications.
- Details
- Total Width: 55
- Total Height: 31
- View area width: 51
- View area height: 14.5
- Thickness: 2
- Status: In production
- Interface: SPI, 4/8 Bit
- Backlight Colour: not available
- Char X Line: 8
- Char Height: 11.97
- Background Colour: black
- Current Backlight Off (mA): 0.25
- View Angle: 6:00 / bottom view
- Display Technology: FSTN
- Pixel Size Y: 1.47
- Pixel Size X: 0.97
- Controller: ST7036
- Active: 1
- Fonts: 1
DOG series character display with 1x8 (line x 8 chars), large 11.97 mm char height. Extremely thin 2.0mm (display only) or 5.7mm when used with a LED backlight, COG display in FSTN negative transflective. 3.3 V or 5 V single supply. The display be can soldered directly into the PCB or plugged into a connector with 2.54 mm pitch EA FL-20. The display has a ST7036 controller with SPI and 4-/8- bit parallel interface. Character set is included and an extra 8 free definable characters can be programmed.
This display requires a backlight.
Possible backlights for use with the EA DOGM081S-A display are EA LED55x31-W (White), EA LED55x31-A (Amber), EA LED55x31-G (Green), EA LEDx31-R (Red), EA LED55x31-B (Blue) and EA LED55x31-RGB (Full colour). The picture shows the EA DOGM081S-A display with the EA LED55x31-W White backlight.
The LED backlight need to be ordered separately. Click HERE for the EA LED55x31 backlights.
Download the free of charge DOG-Simulator and experiment with all combinations of display technology and LED backlight colours. Show the DOG displays on your desktop without any programming or order the EA 9780-4USB test board to power your display.
Click HERE for more details on the DOG-simulator.
